Saturday, September 1, 2012

Race Car Bed - MAKE IT or BUILD IT Yourself - Racecar bed rocks!


RACE CAR BED  -  wood, wheels, rims, tablesaw, race car, racecar, tires, bed frame, IKEA Fjellse

IDEAS I LEARNED from my internet search and from my experience in building this bed:
1. DESIGN: I just got down on the floor and drew a full-size side view of what I wanted the bed to look like, and after revisions that drawing became my pattern for cutting out the bed and for adding details. You can make anything you want: this could easily have been a dumptruck bed or a jet fighter airplane. BUT, JAck and I like race cars! So, I used some old Ferrari pictures for ideas, then drew a car I would like to build. I used paper cutouts the same diameter of the wheels I was going to build as a design template, and stretched the original drawing to fit the dimensions of the IKEA bed frame. I extended the nose longer than looked "just right" so I could put a toy box under a hinged hood. Cause I wanted to...that's what is so great about designing your own stuff!

2. SLIDE: Think like a 4-year old in designing your bed. After assembling the hood, which covers a toy box in the front of this race car bed,  Jack's first idea was "Can I slide on the hood?" That never occurred to me, but of course that's the way a 4-year old would want to get out of his bed: slide off the end of the mattress onto the floor. SOooo, I'm going to go back and strengthen the design of my hinge assembly and hood brace so he can slide on it without anything breaking.



3. RIMS or WHEELS: Make good-looking rims from plastic hubcaps you buy at PepBoys or similar auto stores. They look better to me than wheels cut from plywood and painted silver, just my preference. Cut the tires from flat wood or MDF, using a table saw! It's fun and an easy new skill to acquire...and it works. I found instructions for cutting large diameter circles on a table saw on the internet, then modified the idea to work with my old Ryobi table saw system and router. I believe people judge REAL cars by the RIMS and the PAINT; same thing with car beds, I bet!



4. BODY: I cut it out, then made fender arches from scrap stock left from the body cutout. I rounded the contours of the arches with a sanding disc or belt-sander and glued/nail-gunned  them to the body. Then, fill the nail holes and arch joints with wood putty, sand smooth, and primer. The arches or similar body details are important to break up the flat race car body you cut out, to give it some depth and contours more like a real car. AND, if you don't make fenders of some type, you just have to nail or glue the cool wheels onto a flat board shaped like a car, which doesn't look good, I think. My opinion, FWIW.

5. PAINT: I used hi-build, self-catalyzing lacquer primer and color, plus a gloss clear coat to protect everything. I LIKE lacquer because I paint outside and it dries really fast, so no bugs or dust get trapped in the paint. BUT, get good advice from your local paint supplier because it is a bit tricky (I screwed up a lot, but it's easy to fix!). I recommend you tint your primer to a shade similar to the finish coat so scratches in the finished product (from some four-year-old crawling up and down, etc) won't show so easily. You can use rattle-can spray paint if you like, but be sure to get a lot of it, and use high-build primer to seal the wood, and sand it down smooth as possible.

6. BED FRAME assembly: I used an IKEA Fjellse twin-bed frame as the basis for this project. It's inexpensive, and I didn't have to design mattress-holding hardware...plus this frame can be easily disassembled if it has to be moved. Square up the bed frame BEFORE you assemble the finished race car onto it. We didn't, so this race car isn't as square and symmetrical as I'd like, but it's close enough so no worries.


7. DETAIL LINES: I painted on black "detail lines" to define the shape and some details of the car after I painted it red, and to tidy up the joint lines where I masked off the red body from the white windshield. MASK the lines before you paint them! My artist friends told me NOBODY can paint a consistent-width straight line freehand using only a brush. So if an artist can't do it, I'm willing to use tape too.

8. STICKERS: I got a print shop to make the race car numbers we used, so they looked professional. Ours are 12" diameter. I couldn't have painted anything that looked as good.

Thanks for reading about our bed project, it was a fun build. If you have any comments or suggestions, please leave them on the blog. Now to do some finish details!

9. WINGS: FOUR YEARS (May, 2017) later I got around to making the rear wing/shelf, after Jack's family moved to another house. I used leftover melamine boards from a closet storage project, made what looked like a race car wing to me, and bolted it to the IKEA bed frame. Added some round LED lights underneath, with remote control to change colors and sequence the lights, and now ALL DONE! 





Here are photos of the bed as it was being built, showing a lot more detail of how we did it,  if you are interested. Each photo caption contains additional helpful information on the build. Click on the photo link to see:
MORE PICS of Race Car bed - build it yourself

9 comments:

  1. You commented about hiding the bed legs. How did you accomplish that? Is there a tail wing yet?

    ReplyDelete
    Replies
    1. I'll paint the legs flat black, or wrap them with gaffer's tape. Wing will be built as a Christmas project, so I can get the owner-driver Jack to help. It should be easy (famous last words) and will be a shelf above the headboard strong enough to hold a small lamp and some model cars or books or similar.

      Delete
  2. Hi!
    I am amazed on how you did this project. I am also sure that your son appreciated your work and I can only just imagine how big his smile is. I am a father, too, and from the Philippines. My son just turned 2 years old. He has a crib 5feet in length, customized so he can roam around his crib. Now I am planning to convert his crib to a bed but would want to have it race car-themed. It's great that I have stumbled upon your blog and would want to replicate your brilliant idea.
    I have once question, though, would you recommend using a particle board rather than MDF?
    Can I use spray paint?
    Your suggestions and answers will be much appreciated.

    Regards,
    Leo

    ReplyDelete
  3. Good job! I am impressed to see your creative design of car bed. you are brilliant.
    everybody can't do this type of work.
    If anybody love to these type of bed then Racing Car Beds is perfect place to visit online. https://www.racingcarbeds.com.au/

    ReplyDelete
  4. Nice bed, these types of designer beds is really liked by kids. Great thanks for sharing the tutorial for making this. Keep sharing more designs with us

    tallboy NZ

    ReplyDelete
  5. Hello everyone, We are Children's Furniture - Bao An Kids. Surely when you come to this site, you are looking for a professional children's interior design and construction unit to help you advise and choose for your family and your baby to have a perfect living space and the safest. Thank you for your trust and want to accompany Bao An Kids.



    More:



    https://forum.gorod.dp.ua/member.php?u=312133&vmid=133691#vmessage133691

    https://forums.androidcentral.com/members/noithatbaoan-3127167/

    https://arstechnica.com/civis/memberlist.php?mode=viewprofile&u=798245

    https://forums.watchuseek.com/member.php?u=1415077

    http://instinct-de-survie.forumgratuit.org/u3117

    https://www.diymobileaudio.com/forum/members/noithatbaoan.html

    ReplyDelete
  6. Hi, great article but your links on the last photo don't, could you please fix it?

    ReplyDelete
    Replies
    1. Sorry, that album seems to have been deleted by Google, in have no idea what happened. Some other personal stuff is missing also.

      Delete
  7. Casinos & games | DrmCD
    Play casino slots for 김해 출장마사지 real money at Dr. MD. Find the best casino games, 군포 출장마사지 roulette, 안성 출장안마 blackjack & more. Start 강원도 출장안마 earning real 대전광역 출장샵 money right now.

    ReplyDelete